Components
Inspection Facilities
We at PRASHTECH strongly believe, One cannot control what he cannot measure !
Hence we have all the necessary standard measurement equipments / instruments to inspect each and every dimensional parameter that is produced. Separate sets are maintained at machines & Quality Control Department. Besides these we have many component specific inspection gauges, inspection mandrels, spline gauges, receiving gauges, etc. All these are calibrated as per standard frequency. For most of our Customers, we are self-certified Supplier.
We hire external services for Ultrasonic testing, Spectro analysis, Chemical analysis of elements & physical test as applicable.
We have own meter to do 100% inspection of incoming Raw Materials to ensure radioactive contamination does not exceed globally acceptable limit.
Few representative key equipment’s are demonstrated below.
We at PRASHTECH strongly believe, One cannot control what he cannot measure !
Hence we have all the necessary standard measurement equipments / instruments to inspect each and every dimension that is produced. Separate sets are maintained at machines & Quality Control Department. Besides these we have many component specific inspection gauges, inspection mandrels, spline gauges,
receiving gauges, etc. All these are calibrated as per necessary frequency. For most of components we supply, we are self-certified vendor.
We hire external services for Ultrasonic testing, Spectro Testing, Chemical analysis of elements & physical test as applicable.
Few representative key equipment’s are demonstrated below.
Coordinate Measuring Machine (CMM)
Make
Model
Specification
MITUTOYO
- Measuring Range 700 X 1000 X 600 mm
- Resolution 0.1 µm
- Software – MCOSMOS-III (CNC)
Roundness Measuring Machine
Make
Model
Specification
- Column height = 500 mm
- Max Diameter of Measurement= 435 mm
- Max Loading Diameter = 485 mm
- Rotation Accuracy = +/- (0.015 μm + 0.0003 μm / mm)
- Straightness Accuracy = 0.25 µm over 200 mm
- Parallelism Accuracy = 1 µm over 500 mm
- Max Load Capacity = 75 Kgs
Universal measuring Instrument – Multimar
Make
Model
Specification
MAHR (five)
- Range 100-260 mm with 50-330 mm
- Range: 12.5 mm
- LC : 0.001mm
2D Vertical Measuring Instrument
Make
Model
Specification
Trimos (three)
V7-700
- Measuring Range up to 711 mm
- Maximum deviation from perpendicularity 8 µm
- Maximum resolution
0.0001 mm - with 1 X 1 mt Granite Surface Plate
2D Vertical Measuring Instrument
Make
Model
Specification
MAHR
- Measuring Range : 600 mm
- Perpendicularity error: Frontal ≤ 6 µm
- Resolution : 0.01/0.005/0.001/0.0005/0.0001mm (selectable)
- with 1 X 1 mt Granite Surface Plate
Surface tester
Make
Model
Specification
- Measures Surface Roughness values in Ra, Ry, Rz & Rq.
Radiation Survey meter
Make
Model
Specification
microRAD
